Collection: Truck Electrical Parts (1230)

• 2150 Lumens
• Flood beam
• Protected to IP67
• 50,000 Hours lifetime
• Stainless steel pivot bracket
• E Marked R10 EMC approved

12-24Vdc
88Db
Size (WxHxD): 56 x 50 x 76mm
Medium Duty
Ideal for light commercial use
Bracket mounted
CE and emc marked
With third orange lead (Night Silent)
Epoxy sealed for greater durability against water and vibration
M.I.R.A. tested for all on and off road applications
Pressure washable – IP67

This system is for vehicles that have already fitted a DVS Safe System and have an AHD monitor e.g. a warning sign, left turn speaker, and low speed trigger. From 28th October 2024, all 0-2 DVS star rated HGVs over 12T travelling through Great London will need to install a Progressive Safe System (PSS) before applying for a DVS Safety Permit. Our DVS Progressive Safe System fully complies with the DVS requirement set out by the Transport for London (TfL). Durite Progressive Safe System includes;

• Active AI Camera Blind Spot Information System (BSIS) and Camera System that completely eliminates the nearside blind spot
• Active AI Camera Moving Off Information System (MOIS)
• Visual and audio driver warning

This kit comes with extended warranty. 

Durite LED amber warning lamp with DRL has 6 warning LEDs & 20 DRL LEDs.

• 6 x 3W warning LEDs
• 20 x 0.5W DRL LEDs
• 10 Flash patterns
• Protected to IP67
• Surface mount
• L124.3 x W 44.2 x H 16.5mm
• E-Marked R10, EMC, R65, R148 approved

This Durite 12/24V Li-Ion Jump Starter Pack is super light & compact and suitable for all petrol & diesel 12/24V vehicles. It has a built in battery heat pack that supports cold cranking and a 3W LED work light.

• Starts petrol & diesel vehicles up to 18L
• Super fast charging time of 4 hours
• Built in battery heat pack
• Built in 3W LED work light
• 56,000mAh
• 2,000A peak current, 1,000A starting current
• 1 x 5V 3A USB output, 1x12V 10A socket output
• L260.7 x D188.0 x W148.7mm
• UKCA, CE approved

Genuine Anderson SB175 leads. 

Cable is certified to 240Amp, Plugs are 175Amp. 

Made from High Flex 35mm Cable, using a state of the art Crimp press. 

Standard Lengths are listed, but any length can be made with a couple of days notice. 

These leads are used to connect Truck to Trailer as well as for Tail Lift applications.

Pollux9+ Strobe – an auxiliary light with extra everything!

Pollux9+ Strobe is a further development of Ledson’s immensely popular Pollux9+ Gen 2. In addition to a wide and long light pattern with the Driving beam from the TIR reflectors with 480 meters at 1 Lux, it also has selectable position light (white or orange), stable attachment, electronic temperature optimization, Goretex pressure equalization membrane and all that which distinguishes the standard Pollux9+. The Pollux9+ Strobe also has an ECE R65 approved strobe light. This warning light consists of four powerful LEDs that can be set in five different flash patterns.

TIR reflectors

TIR stands for Total Inner Reflection and means that all light is effectively reflected and directed before it is sent out from the reflector. The spill light (the light that is not directed but which disappears “unfocused” from the light without making any real use) is minimized. In summary, you get more efficient light on the road and take full advantage of every LED on the auxiliary light with the TIR reflectors.

Specifications:

• Five different warning light patterns, one that is ECE R65 approved
• Synchronizable with each other
• E marked (E8, ref. 37,5), ECE R112 / R10 / R7 (white position light)
• EMC secured (does not disturb the radio)
• With position light (4 LEDs) yellow-orange or xenon white (connect the color you want)
• Driving beam light pattern with range: 960 m (0.25 lux), 480 m (1 lux)
• Spot beam light pattern with range: 1148 m (0,25 lux), 574 m (1 lux)
• 12000 lumens (theoretical), 9600 lumens (actual)
• Cold White Light (6500 K)
• TIR optical system (Total Inner Reflection)
• Pressure equalization membrane
• 36 month warranty

Technical data:

• 120 W (12 x 10 W Cree XM-L2 LED)
• 4 pcs LED for strobe light
• Nominal power 92,4 W
• IP68 (water/dust proof)
• 6 pole DT connector (2-pin adapter included)
• Electronic heat management
• Voltage 9-36 V
• Load 7,7 A @ 12 V and 3,6 A @ 24 V

Measurement & weight:

• Width: 218 mm
• Height: 234,5 mm (incl bracket)
• Depth: 68,5 mm
• Weight: 1,9 kg
• Cable length: 650 mm

Supplied:

• Pollux9+ Strobe Ledson LED auxiliary light 9″ with strobe function
• Bolts and screws for attaching the auxiliary light with either one or two attachment points
• DT connector (6 pole, supplied with 2 pole adapter)
• Installation instructions

Installation instructions for cables (detailed instructions included with the product):

• Red: Auxiliary light (+)
• Black: Auxiliary light/ Position light (- ground)
• Grey: Position light (+) white light
• Yellow: Position light (+) orange light
• Green: Strobe light (+)
• Blue: Strobe light switch of pattern / synchronization

Strobe pattern synchronization: Connect the blue wires of two or more auxiliary lights, then momentarily connect these to the positive terminal for 3 seconds to reset the strobe frequency on all connected lights, then all flash patterns are shifted.

Left hand front grill spotlight to suit Scania Next Gen models.

OE - 2552711, 2659163

Right hand front grill spotlight to suit Scania Next Gen models.

OE - 2552712, 2659164

• Length: 201mm - Width: 75mm - Height: 91mm - Depth: 73mm - Lamp Type: LED
• Light functions: 1 - with high beam (LED)
• Registration Type: ECE - Fulfils ECE norm.: R10/R149 - Prot.type (IP Code): IP68/IP69K
• Aluminium Housing - Housing Colour: Black - Frame Colour: Black - Lens Colour: Crystal clear
• Mounting Type: mounting/Screw Connection - Fastening Type: Vertical
• Typical Black Magic appearance including black brackets in a robust design
• Powerful light output due to modern reflector system in all 14 ECE-approved versions!
• Typical mounting locations include installation on the roof or roof bar, the radiator grille or bumper
• 7˝ Double Row Mini Lightbar, eTSD, ECE ref. 30
• IP 68, IP 69K, ECE-R10, ECE-R149, 2,000 mm cable with open ends, 5,700 Kelvin
• Part Number: 1FJ 358 196-451

The ECE type-approved HELLA Black Magic Lightbars provide high beam (ECE-R149) with a very powerful light output of up to 9,200 effective lumens, ideal for off-road situations where you need it most and for trucks that need really good light. Both the slim and double lightbars offer a high recognition effect with their stylish and robust look in an all-black design. Typical installation locations are on the roof or roof bar, the radiator grille or bumper. The product complies with the highest dust / waterproof class. The extra-long 2 m cable makes it easy to attach to your vehicle.

10 - 30 volt
16 x OSRAM LEDs
Lumens 5200 raw / 4000 effective
Single bolt surface mount fixing
Current draw at 12 volt is 2.6 amps
Rated IP69K
ECE R10, EMC, CE and E approved
Flood beam pattern
Reverse polarity protection
Aluminium housing with polycarbonate lens
Dimensions H.110mm W.100mm D.45mm
Pack size 1

10 - 30 volt
16 x 3 watt SMD LEDs
Lumens 4800 Raw / 4300 Effective
Single Bolt Surface Mount Fixing
Current Draw at 12 volt is 3 Amps
Rated IP67
EMC, CE and E Approved
Reverse Polarity Protection
Polycarbonate Flood Beam Lens and Aluminium Body
Dimensions H.137mm W.110mm D.70mm
Pack Size 1

12 - 24 volt
6 x 4 watt LEDs
Lumens 1500
2 Bolt Surface Mount Twist and Tilt Fixing Bracket
Current Draw at 12 volt is 1.9 Amps
Rated IP68
EMC and CE Approved
Reverse Polarity Protection
Polycarbonate Lens, Plastic Frame with Aluminium Body
Switched
Dimensions H.205mm W.110mm D.70mm
Pack Size 1

Amber Side Marker Lamp
12 volt
4 x LEDs with Reflex Reflector
2 Bolt Surface Mount Fixing
Cable Connection
Maximum Current Draw at 12 volt 0.08 Amps
Rated IP67
ECE Approved
PMMA Lens and ABS Housing
Dimensions L.120mm H.63mm D.21mm
Pack Size 1

Amber Side Marker Lamp
24 volt
4 x LEDs with Reflex Reflector
2 Bolt Surface Mount Fixing
SuperSeal Connection
Maximum Current Draw at 24 volt 0.04 Amps
Rated IP67
ECE Approved
PMMA Lens and ABS Housing
Dimensions L.100mm H.51mm D.22mm (Fitted)
Pack Size 1

Red Rear Marker Lamp
24 volt
4 x LEDs with Reflex Reflector
2 Bolt Surface Mount Fixing
SuperSeal Connection
Maximum Current Draw at 24 volt 0.04 Amps
Rated IP67
ECE Approved
PMMA Lens and ABS Housing
Dimensions L.100mm H.51mm D.22mm (Fitted)
Pack Size 1