Collection: Automotive Vehicle Lighting (1233)

Left Hand End Marker
12 - 24 volt
3 x LEDs
4 Bolt Surface Mount Fixing
Current Draw at 12 volt is 0.05 Amp
ECE Approved
Rubber Body
Clear, Red & Amber Lenses
ECCO No. L450.200.LMV
Dimensions L.190mm
Pack Size 1

Amber Side Marker Lamp
12 - 24 volt
4 x LEDs
2 Bolt Surface Mount Fixing
520mm Cable Connection
Current Draw at 12 volt is 0.05 Amps
ECE Approved
PMMA Lens
ECCO No. L47.01.LDV
Dimensions L.120mm H.45mm D.11mm
Pack Size 1

This R65 Road Legal clear lens LED beacon features an ABS base and polycarbonate lens that is built to last. This high-quality beacon comes with a 3-year warranty as standard, giving you extra reassurance.

• 24 X 3W LEDs
• Robust with modern design
• Single, Double & Rotating flash patterns

LED  headlight with 6 light functions:

LED Low Beam
LED Side Marker Light
LED Indicator
LED High Beam
LED Position Light
LED Daytime Running Light

• Length: 524mm - Width: 50mm - Height: 62mm - Depth: 63mm - Lamp Type: LED
• Light functions: 1 - with high beam (LED)
• Registration Type: ECE - Fulfils ECE norm.: R10/R149 - Prot.type (IP Code): IP68/IP69K
• Aluminium Housing - Housing Colour: Black - Frame Colour: Black - Lens Colour: Crystal clear
• Mounting Type: mounting/Screw Connection - Fastening Type: Vertical
• Typical Black Magic appearance including black brackets in a robust design
• Powerful light output due to modern reflector system in all 14 ECE-approved versions!
• Typical mounting locations include installation on the roof or roof bar, the radiator grille or bumper
• 20˝ Slim Lightbar, eTSS, ECE ref. 50
• IP 68, IP 69K, ECE-R10, ECE-R149, 2,000 mm cable with open ends, 5,700 Kelvin
• Part Number: 1FJ 358 196-301 

The ECE type-approved HELLA Black Magic Lightbars provide high beam (ECE-R149) with a very powerful light output of up to 9,200 effective lumens, ideal for off-road situations where you need it most and for trucks that need really good light. Both the slim and double lightbars offer a high recognition effect with their stylish and robust look in an all-black design. Typical installation locations are on the roof or roof bar, the radiator grille or bumper. The product complies with the highest dust / waterproof class. The extra-long 2 m cable makes it easy to attach to your vehicle.

Right Hand End Marker
12 - 24 volt
3 x LEDs
4 Bolt Surface Mount Fixing
Current Draw at 12 volt is 0.05 Amp
ECE Approved
Rubber Body
Clear, Red & Amber Lenses
ECCO No. L450.210.LMV
Dimensions L.190mm
Pack Size 1

Red Rear Reflex Reflector
Self Adhesive Backing
ECE and SAE Approved
Dimensions L.96mm H.42mm D.7mm
Pack Size 1

Durite amber side LED marker lamp is supplied with an ABS bracket for flexible & easy mounting

• 2 x SMD LEDs & reflex reflector
• Protected to IP67
• 150mm flying leads
• E-Marked R10, R3 & R91 approved

Pollux9+ Strobe – an auxiliary light with extra everything!

Pollux9+ Strobe is a further development of Ledson’s immensely popular Pollux9+ Gen 2. In addition to a wide and long light pattern with the Driving beam from the TIR reflectors with 480 meters at 1 Lux, it also has selectable position light (white or orange), stable attachment, electronic temperature optimization, Goretex pressure equalization membrane and all that which distinguishes the standard Pollux9+. The Pollux9+ Strobe also has an ECE R65 approved strobe light. This warning light consists of four powerful LEDs that can be set in five different flash patterns.

TIR reflectors

TIR stands for Total Inner Reflection and means that all light is effectively reflected and directed before it is sent out from the reflector. The spill light (the light that is not directed but which disappears “unfocused” from the light without making any real use) is minimized. In summary, you get more efficient light on the road and take full advantage of every LED on the auxiliary light with the TIR reflectors.

Specifications:

• Five different warning light patterns, one that is ECE R65 approved
• Synchronizable with each other
• E marked (E8, ref. 37,5), ECE R112 / R10 / R7 (white position light)
• EMC secured (does not disturb the radio)
• With position light (4 LEDs) yellow-orange or xenon white (connect the color you want)
• Driving beam light pattern with range: 960 m (0.25 lux), 480 m (1 lux)
• Spot beam light pattern with range: 1148 m (0,25 lux), 574 m (1 lux)
• 12000 lumens (theoretical), 9600 lumens (actual)
• Cold White Light (6500 K)
• TIR optical system (Total Inner Reflection)
• Pressure equalization membrane
• 36 month warranty

Technical data:

• 120 W (12 x 10 W Cree XM-L2 LED)
• 4 pcs LED for strobe light
• Nominal power 92,4 W
• IP68 (water/dust proof)
• 6 pole DT connector (2-pin adapter included)
• Electronic heat management
• Voltage 9-36 V
• Load 7,7 A @ 12 V and 3,6 A @ 24 V

Measurement & weight:

• Width: 218 mm
• Height: 234,5 mm (incl bracket)
• Depth: 68,5 mm
• Weight: 1,9 kg
• Cable length: 650 mm

Supplied:

• Pollux9+ Strobe Ledson LED auxiliary light 9″ with strobe function
• Bolts and screws for attaching the auxiliary light with either one or two attachment points
• DT connector (6 pole, supplied with 2 pole adapter)
• Installation instructions

Installation instructions for cables (detailed instructions included with the product):

• Red: Auxiliary light (+)
• Black: Auxiliary light/ Position light (- ground)
• Grey: Position light (+) white light
• Yellow: Position light (+) orange light
• Green: Strobe light (+)
• Blue: Strobe light switch of pattern / synchronization

Strobe pattern synchronization: Connect the blue wires of two or more auxiliary lights, then momentarily connect these to the positive terminal for 3 seconds to reset the strobe frequency on all connected lights, then all flash patterns are shifted.

LED  headlight with 6 light functions:

LED Low Beam
LED Side Marker Light
LED Indicator
LED High Beam
LED Position Light
LED Daytime Running Light

9 - 32 volt
16 x 3 watt SMD LEDs
Lumens 4320 raw / 2378 effective
Single bolt surface mount fixing
Current draw at 12 volt is 2 amps
Rated IP67
ADR, EMC, CE and E approved
Deutsch connection
Flood beam pattern
Reverse polarity protection
Die cast aluminium housing with polycarbonate lens
Dimensions H.136mm W.110mm D.65mm
Pack size 1

10 - 30 volt
9 x 3 watt LEDs
Lumens 2400 Raw / 1800 Effective
Single Bolt Surface Mount Fixing
Current Draw at 12 volt is 1.6 Amps
Rated IP67
EMC, CE Approved
Reverse Polarity Protection
Polycarbonate Flood Beam Lens and Aluminium Body
Dimensions H.128mm W.115mm D.51mm
Pack Size 1

12 - 24 volt
LEDs - Stop x 8, Tail x 12, DI x 8
Functions - Stop | Tail | DI
2 Bolt Surface Mount Fixing
Cable Connection
Current Draw at 12 volt is 0.4 Amps
Universal Fitting
EMC, CE, E Mark Approved
Rated IP68
Neon Effect
Dimensions L.102mm H.108mm D.38mm
Pack Size 1

New & Improved, Still The KING!

Rechargeable, waterproof (IP67) and extremely versatile, the SLYDE KING 2K features a 2,000 lumen flashlight with 4x zoom, and a 500 lumen COB work light. Each light mode is dimmable with programmable memory.
The 2K also has an ergonomic rubberised grip and powerful magnetic base.

7 LIGHT MODES
Flashlight High (2000 lumens): 2 hour runtime | 409 metre beam
Flashlight Low (200 lumens): 12 hour runtime | 125 metre beam
COB Work Light High (500 lumens): 4 hour runtime | 34 metre beam
COB Work Light Low (50 lumens): 24 hour runtime | 10 metre beam
Red COB High (40 lumens): 6 hour runtime | 9 metre beam
Red COB Low (4 lumens): 60 hour runtime | 3 metre beam
Red COB Flash (40 lumens): 6 hour runtime | 9 metre beam

DESIGN
USB-C rechargeable
4x adjustable zoom
Dimming + Power Memory Setting
Direct-to-Red
Power indicator | Battery charging indicator
Rubberised grip
Anodized aircraft-grade aluminium
Water (IP67) and dust proof
Powerful magnetic base
Pack size 1

OPERATION
Side-positioned backlit button with power indicator

ACCESSORIES
USB-C charging cable included
Lanyard

BATTERIES
Powered by internal rechargeable battery

DIMENSIONS
Weight: 453g
Height: 190mm (Extended: 244mm)
Diameter: 41mm

Amber Side Marker Lamp
10 - 30 volt
3 xSMD LEDs with Reflex Reflector
2 Bolt Surface Mount Fixing
450mm Cable Connection
Current Draw at 12 volt is 0.02 Amps
Rated IP67
E Mark Approved
Dimensions L.129mm H.32mm D.14mm
Pack Size 1