Bodywork and interior tools for commercial vehicle repair
Bodywork repair on HGV cabs requires a different toolkit to passenger car bodywork. Modern truck cabs use a combination of steel, aluminium, and composite plastic panels depending on the section and manufacturer, and the repair approach varies by material. Steel sections can be filled and worked in the conventional way; composite and ABS panels typically require bonded repair or replacement rather than metal shrinking or filling.
Trim removal tools are essential for cab interior work without causing cosmetic damage to the surrounding panels. Standard screwdrivers and levers cause trim clip breakage and leave marks on plastic surfaces. Trim removal sets with pry levers in different widths and profiles protect the panel surface and make clip removal and refitting repeatable.
For panel pulling and minor dent repair on steel sections, slide hammer and dent puller sets allow access from the front of the panel without requiring strip-down of the complete assembly. This is particularly useful on door skins and wing sections where the panel is accessible but the back face is not. If you need a specific tool for a bodywork repair job, call us on 01527 598 000 and we can advise on the correct equipment.
Frequently Asked Questions
What bodywork repair tools do you stock for HGVs?
We stock trim removal sets, panel pry tools, slide hammers, dent puller kits, and cab interior service tools for HGV and commercial vehicle repair. The range covers the most common bodywork and interior tasks. If you need a specific specialist tool, call us and we'll check availability.
What tools do I need for removing HGV cab trim?
A trim removal kit with multiple pry lever profiles is the correct approach. Different cab manufacturers use different clip types, and a single-tool approach causes clip damage and panel marking. Nylon or composite pry tools are better than metal for plastic trim surfaces. A trim clip assortment alongside removal tools means you can replace any clips that don't survive the strip-down.
Can bodywork dents on HGV cabs be repaired without full panel replacement?
Minor dents on steel cab sections can often be repaired using slide hammer and dent puller tools without replacing the panel, depending on depth and location. Composite and ABS plastic panels are less suited to this approach and typically require bonded repair or replacement. Assess the material and extent of the damage before deciding on repair method.
Do you stock tools for working with composite truck panels?
Yes. We stock tools suited to composite panel work including adhesive application tools, plastic welding equipment, and panel bonding tools used on modern cab panels. Call us on 01527 598 000 to discuss what's needed for a specific repair.
Sold out
Sale
Sale
Sold out
Sold out
Sold out
Sold out
