Sanders & Polishers (2)

Air sanders and polishers for commercial vehicle bodywork and paint preparation, including orbital sanders, straight-line sanders, angle grinders and air polishers. In stock for next-day UK delivery or same-day collection.

  • SIN-300.1527.jpg
    Sold out

    POWERHAND 20mm X 520mm Belt Sander

    SKU: SIN-300.1527
    Lightweight cast aluminium housing for reduced operator fatigue Variable speed control for smooth power delivery 180 ° pivot arm for improved access Knurled grip handle

    Technical Specification No-load speed: 16,000rpm, Air inlet: 1/4, Air consumption: 2.47cfm, Vibrations: 0.3m/s ², Noise level: 85dB
    Weight 1.2kg
    £203.95 ex. VAT
    £203.95 ex. VAT
  • SIN-300.1528_.jpg
    Sold out

    POWERHAND 10mm X 330mm Belt Sander

    SKU: SIN-300.1528
    Lightweight cast aluminium housing for reduced operator fatigue Variable speed control for smooth power delivery 180 ° pivot arm for improved access Knurled grip handle

    Technical Specification No-load speed: 18,000rpm, Air inlet: 1/4, Air consumption: 2.01cfm, Vibrations: 0.4m/s ², Noise level: 85dB
    Weight 0.8kg
    £138.95 ex. VAT
    £138.95 ex. VAT

Air sanders and polishers for commercial vehicle bodywork

Air-powered sanders and polishers are standard tools in any commercial vehicle body shop or cab repair facility. Orbital air sanders are the workhorse for paint preparation and surface levelling, offering a swirl-free finish at higher stock removal rates than hand sanding. Straight-line or reciprocating sanders are used for flat panel work and filler blocking. Random orbital polishers with foam pads are used to cut and polish paint after colour matching repairs.

Air tools are preferred over electric equivalents in bodywork environments because they are lighter, easier to control at sustained use, and carry no risk of electrical fault in areas where flammable vapours may be present from paint and solvent use. Air supply requirements vary by tool; confirm the CFM (cubic feet per minute) consumption of the tool against your compressor's output before purchasing to ensure adequate performance. Most professional bodywork air sanders run at 4-6 CFM at 90 psi.

Call our team to discuss the right air sander or polisher for your application. UK nationwide delivery or same-day collection from our branches.

Frequently asked questions

What air sander is best for truck cab paint preparation?

A random orbital air sander is the most versatile choice for general paint preparation on truck cab panels, offering good stock removal with a swirl-free finish. For primer and filler flatting, a straight-line sander or a dual-action orbital with a harder backing pad provides better control. Choose a sander with a comfortable grip and adjustable speed for prolonged use on large commercial vehicle panels.

How much air supply do air sanders and polishers need?

Most air sanders operate at 90 psi and consume 4-8 CFM depending on the pad size and motor. Orbital polishers typically use 3-5 CFM. For sustained use, your compressor needs to maintain supply without constant cycling. A minimum 50-litre tank and a compressor rated above the tool's peak consumption is the practical baseline for professional bodywork use.

Are air tools safer than electric tools in a paint shop?

Yes. Air tools carry no electrical risk from sparks or shorts, which makes them significantly safer in environments where solvent vapours from primers, lacquers and cleaning agents may be present. They are also lighter and easier to use for long periods without fatigue compared to equivalent electric tools.