Collection: Truck Lighting Accessories (49)

For maximum control and flexibility with regards your auxiliary lighting installations, Lazer is pleased to offer a Bluetooth push button. Compatible with the CANNY Interface, the Smart Button enables control of your lights without the need for connecting additional wires within your vehicle

The CANNY Smart Button can be installed anywhere within the vehicle, or on your person, within 10m of the CANNY Interface it’s paired with. It allows for lighting functions to be controlled at the touch of a button, and via the CANNY.LZR app can be configured to control up to 4 outputs, as a stand-alone switch or in combination with other CANNY Smart Buttons. The Smart Button can also be programmed to operate lights regardless of the vehicle ignition being on (or more specifically regardless of power being received by the vehicle’s CAN bus system).

Examples of practical functions include:

De/activation of your high beam lights (regardless of the vehicle high beams being on/off) – especially relevant in countries which restrict the number of auxiliary lights permissible to be connected to the vehicle high beams.
De/activation, or switching, of the position light function on your Lazer product.
De/activation of your work / reverse lights on the vehicle. The customer can select via the CANNY App whether to configure the button so that the CANNY output stays on, or switches off, when the vehicle ignition is off (and when CAN signals stop being sent over the Can Bus system)
Mode select on Beacon function of your lamps
Note, when using CANNY Smart Button to control the yellow dip mode of an Elite+ product, it would be required to wire in an additional relay to the switching channel of the lamp, to reverse the polarity of the signal. Please check out our blog piece for details on how to do this.

The CANNY Smart Button isn’t only compatible with auxiliary lighting solutions. Via the CANNY Interface, the Smart Button can be configured to operate the outputs of CANNY, regardless if those outputs have been set to control auxiliary lighting, or other 12V accessories fitted to the vehicle.

For a Quick Start Guide to the CANNY Smart Button please check out the Downloads section.

Note: CANNY Smart Button is only compatible with a corresponding CANNY Interface. 

Centre mounting bracket includes A2 stainless steel hardware combined with extremely tough PA66 GF30 (glass filled nylon) ruggedised mounts. Mounts can be fitted above or below lights using M5 grub screws to locate within the lamp mounting channels. Bracket orientation can be reversed in order to push the light further forward/backwards relative to the vehicle mounting point. For use with all Triple-R and ST/T range lamps.

• A2 Stainless Steel hardware
• Uses PA66 GF30 (glass filled nylon) material
• Suitable for mounting above or below lamps
• Fully adjustable - reversible bracket orientation

Specifically designed for the Utility-25 work light, the Amber lens cover engages perfectly with the lamp housing for a secure fitting, that allows the colour of light to be changed from 5000 kelvin to ‘selective yellow’. The lenses are made from polycarbonate, and feature a gasket which helps prohibit water and dust getting between the lenses.

• Easily alter colour temperature to ‘selective yellow’
• Improved visibility in rain, fog, and snow conditions
• Designed for use with Utility-25 work lamp
• Includes a gasket to prohibit water and dust getting behind the lens
• Made from polycarbonate

The Linear Stay Bar kit comprises a 2mm stainless steel stabilising 'arm', comprising two parts, which fits to the Lazer Lamps range of Linear LED spotlights. The stabilising arm is secured to the lamp using the supplied bracket, before fixing to an additional rigid mounting location on your vehicle, thereby reducing vibration, stress, and movement which can affect some light installations. Suitable for a single Linear spotlight. Length: 130mm - 230mm

• Reduces vibration, stress, and movement on LED lamp installations
• Compatible with Linear LED spotlights
• Easy installation
• Made from stainless steel
• Suitable for one lamp

The Linear Anti-Theft Side Bracket Kit offers customers peace of mind of fixing products with extra protection against theft. The stainless steel brackets are pre-treated for maximium corrosion resitance then poweder coated black. The supplied fasteners are all A2 stainless steel and have a unique locking key both in respect of fixing the lights to the brackets, and the brackets to the vehicle. Bracket orientation can be altered in order to raise/lower the light <13mm relative to the vehicle mounting point.

• Unique locking key for all lamp and vehicle mounting points
• Brackets pre-treated with an e-coating, then powder coated black
• A2 stainless steel hardware included
• Height adjustable allowing for lamps to be raised/lowered <13mm
• Compatible with Linear lamps only

A range of lens covers for the RP Series & Utility-50/80 HD LED lamps. Made from polycarbonate, the covers clip securely to the lamps offering an additional layer of protection, styling or change to the beam pattern on the lamps. The amber lens cover, converts the colour temperature of the light to selective yellow, and with the reeded lens, it allows you to increase the angle of the beam pattern by varying amounts.

• Available in Black, Clear, or Amber
• Reeded and Half-Reeded available (Clear and Amber)
• Black version comes with Lazer logo printed on the front
• Made from polycarbonate
• Secures using 3-point clipping mechanism

A range of lens covers for the Sentinel lamps. Made from polycarbonate, the covers clip securely to the lamps offering an additional layer of protection or styling to the lamps, or in the case of the amber lens cover, the option to convert the colour temperature of the light to selective yellow.

• Amber clip-on lens cover
• Designed for use with Sentinel LED spotlights
• Changes colour of light to 'selective yellow'
• Made from polycarbonate
• Secures using 3-point clipping mechanism

A range of lens covers for the RP Series & Utility-50/80 HD LED lamps. Made from polycarbonate, the covers clip securely to the lamps offering an additional layer of protection, styling or change to the beam pattern on the lamps. The amber lens cover, converts the colour temperature of the light to selective yellow, and with the reeded lens, it allows you to increase the angle of the beam pattern by varying amounts.

• Available in Black, Clear, or Amber
• Reeded and Half-Reeded available (Clear and Amber)
• Black version comes with Lazer logo printed on the front
• Made from polycarbonate
• Secures using 3-point clipping mechanism

For seamless integration of lights onto a wide variety of road vehicles, the Lazer Licence Plate Mounts offer a perfect, cost-effective solution. The two-part design provides complete flexibility for mounting either a single light or a pair of lights, accommodating various sizes. Constructed from lightweight folded aluminium and finished with a sleek black powder coating, these mounts blend durability with style. Each kit includes rivets for easy attachment to the vehicle's license plate mount. Drivers must ensure that the lights are securely and robustly fitted to the front of the vehicle. Self-tapping screws can be used for bumpers made of strong engineered materials like PC-ABS; however, for polypropylene bumpers, it is recommended to use the supplied rivets for secure mounting. For added stability, the optional Lazer Stay Bar Kit helps minimize vibration, which may occur in some installations (such as with the Linear / Triple-R / Sentinel / ST range) on vehicles with less rigid bumper fascias. Weighing just 225 grams, these brackets are compatible with the majority of Lazer Lamps' UNECE-approved LED lights.

• Made from aluminium with a black, powder coat finish
• Ultra-lightweight, sleek design
• Includes rivets and self-tapping screws for a quick and secure installation
• Universal compatibility
• Max load – 5kg
• Quick fitting time <10mins
• Manufactured in the UK

#VALUE!

#VALUE!

#VALUE!

#VALUE!

The Two-Lamp Link Piece is specifically designed to fit between a pair of Lazer High Performance LED lights (ST Evolution or Triple-R) to provide added stability to your light installation, while also ensuring the lights are perfectly aligned. Made from extruded aluminium, with an anodised satin black finish, the link piece slots into the upper, or lower, channels of a pair of lamps and is held securely in place by 4 grub screws.

• Made from extruded aluminium
• Black anodised coating to perfectly match the finish of lights
• Provides rigidity to any Lazer road-legal light installation
• Universal compatibility – suitable for ST//Triple-R range (not suitable for Linear)
• Supplied as singles, with 4 grub screws

The Glide Stay Bar kit comprises an 2mm A2 stainless steel stabilising 'arm', comprising two parts, which fits to the Lazer Lamps range of Glide LED light bars. The stabilising arm is secured to the back of the lamp through a pre-drilled threaded hole thereby reducing vibration, stress, and movement which can affect some light installations. Suitable for a single Glide LED light bar.

• Reduces vibration, stress, and movement on LED lamp installations
• Compatible with Glide LED light bar
• Made from A2 stainless steel
• PTFE coated for excellent corrosion resistance
• Suitable for one lamp

The Sentinel Stay Bar kit comprises a 2mm A2 stainless steel stabilising 'arms', comprising two parts, which fits to the Lazer Lamps range of Sentinel LED spotlights. The stabilising arm is secured to the back of the lamp through a pre-drilled hole with thread-forming bolt thereby reducing vibration, stress, and movement which can affect some light installations. Suitable for a single Sentinel spotlight.

• Reduces vibration, stress, and movement on LED lamp installations
• Compatible with Sentinel LED spotlights
• Pre-drilled mounting hole with thread forming bolt
• Made from A2 stainless steel
• PTFE coated for excellent corrosion resistance
• Suitable for one lamp