Collection: Automotive Vehicle Consumables (80)

Forté Diesel Emission Reducer has been specifically formulated to rapidly reduce exhaust emissions and help vehicles pass the new emissions test.

Forté Diesel Emission Reducer contains a special fuel-borne catalyst to improve combustion and clean the fuel system, combustion chamber and exhaust system.

Forté Diesel Emission Reducer should be added to the fuel system.

• Ultra-fast exhaust emission and soot reduction

• Reduces exhaust smoke

• Removes internal and external injector deposits restoring flow and spray patterns

• Cleans the combustion  chamber improving compression

• Cleans after combustion and through the external exhaust system and its components

• Restores combustion and engine performance

• Compatible with all diesel engines including diesel hybrid

• For all diesel fuels up to B30

Works before, during, and after combustion without increasing the exhaust gas value

High exhaust emissions can have other causes. For best results, it is recommended to flush the engine with New Generation Engine Flush and change the oil, oil filter, and air filter.

Forté Diesel Particulate Filter Cleaner and Regenerator has been specifically formulated to combat the adverse effects that start/stop driving conditions have on Diesel Particulate Filter (DPF) regeneration. With continued stop/start driving patterns and road restriction challenges such as Regular travel in low-speed zones, soot loading builds up in the DPF since the ECU is unable to make the necessary small adjustments to the fuel injection timing to increase the exhaust temperature and initiate regeneration.

Forté DPF Cleaner and Regenerator uses a catalyst to adhere to the soot particles during combustion, lowering the temperature at which they can be burnt off. The soot particles will burn at lower temperatures in the soot filter area, helping to regenerate the filter, especially in cases where exhaust temperatures are low, like stop-and-go traffic, city traffic, and short drives.

Forté DPF Cleaner and Regenerator should be used at regular service intervals in conjunction with Forté Advanced Formula Diesel Treatment and when the symptoms indicate that treatment is necessary.

Recommendation:

Clean and lubricate the fuel system with Forté Advanced Formula Diesel Treatment during regular maintenance and add Forté DPF Cleaner and Regenerator to ensure efficient Diesel Particulate Filter operation.

Compatible with all diesel engines.

• Aids passive regeneration of Diesel Particulate Filter
• Actively reduces soot emissions
• Improves stability of Diesel Particulate Filter systems
• Compatible with all diesel engines
• For diesel and bio diesel up to B30

Pink is a gentle interior cleaner and dressing, use through hand spray and apply with a soft cloth on interior surfaces, Pink has a gentle cleaning action, superb finishing properties and a fantastic long lasting fragrance. The longer you leave before you buff off the better the shine but don’t leave too long and apply evenly and sparingly. In summertime Pink makes a fantastic tyre shine so it can be used on the interior and exterior.                                           

Always read full label before use.

It really is that simple, ‘Spray, Wipe, Done!’

The Original and Best by Far!

STRONG AS AN OX Multi-purpose Epoxy Putty is a mouldable, solvent free, super strong, waterproof adhesive filler that can be drilled, sanded, filled, painted and will not rust. Suitable for using on pipework, tanks, tools, radiators, ceramics, wood, most plastics and much more. FILLS, JOINS & STICKS. Sets in minutes.

This pack contains 6 small 5g pellets (30g of putty in total)

For whatever the jobs calls for, UltraGrime® Pro Multiuse wipes will be there to clean up the mess. This special formula is designed to handle any and all messes no matter your line of work. Whether you need to clean up oil, grease, ink, paint, silicones, or uncured PU foam, reach for your UltraGrime® Pro Multiuse Clothwipes to handle it.

The beauty is in the cloth-like fabric that won’t rip or deteriorate during use. Plus, these wipes stay wetter and usable for longer than any other wipe, so you can go from one mess to the next with ease. Forget about costly cleansing solutions and wimpy paper towels and go for the wipes made to do it all.

Advanced formula with rust inhibitors & moisture displacers. Silicone FREE formula.

Penetrates & lubricates. 

Frees seized parts fast!

Cleans & de-greases.

Inhibits rust & corrosion.

Protects all metals.

For heavyweight drive chains, e.g.fork-lift truck masts, motorcycle chains.

• Silicone FREE
• Penetrating anti-fling formula
• Rubber grommet friendly

Trim Gel is a gel dressing to give your tyres and exterior trim that wet, new look finish with a luscious grape fragrance. Trim Gel is a unique special formula designed as a very durable tyre, plastic and rubber gel dressing leaving a new finish to all your exterior trim. Simply add a little to your application pad and paint it on, you can vary the finish from satin to gloss by simply applying more or less coats. Only a small amount required, very economical in use.                                                                                             

Always read full label before use.

It really is that simple, ‘Spray, Wipe, Done!’

The Original and Best by Far!

Jelly Fresh masks unpleasant odours leaving a delicious jelly bean fragrance. Simply spray the amount required to your own tastes and allow to dry. Take care not to spray where staining may occur, if this happens then wipe over with a damp cloth, Jelly Fresh can also be diluted for economy. Always read full label before use.

It really is that simple, ‘Spray, Wipe, Done!’

The Original and Best by Far!

Forté Seal Conditioner is a synthetic seal treatment that restores the elastomer properties to seals.

A major cause of oil burning and exhaust smoking in automotive engines is due to the valve stem seals hardening and shrinking, which results in oil leaking past these seals into the combustion chambers. This condition can be treated by adding Forté Seal Conditioner to the crankcase oil.

Forté Seal Conditioner is compatible with all conventional crankcase and gear oils, including fully synthetic and semi-synthetic engine and gear oils. Forté Seal Conditioner is not compatible with aqueous and non-petroleum oil-based fluids.

• Reduces oil burning and exhaust smoking in vehicles where oil is leaking past the valve stem seals
• Reduces unsightly leaks from camshaft and crankshaft oil seals
• Reduces oil leaking from seals in a wide variety of automotive equipment
• Ideal for used car preparation

Forté New Generation Engine Flush is an improved blend of cleaning agents, dispersants and anti-wear agents with increased cleaning and moisture emulsification capabilities.

It is formulated to overcome the increased levels of contamination in modern high output tight tolerance engines caused by the effects of biodiesel and ethanol based fuels and exhaust gas after-systems.

Combat Biodiesel and Ethanol Fuel Contamination in the Oil System

Specifically for:

Diesel Turbo

DPF

SCR

Start/Stop

Wet Belt

• Rapid cleaning of engines internally and provides anti-wear protection.
• Cleans and removes sludge, varnish, and lacquer caused by the effects of biodiesel and ethanol-based fuels.
• Emulsifies moisture present in the crankcase and removes white sludge deposits.
• Compatible with internal drive belt systems.
• Stabilises cylinder compression restoring lost engine power.
• Cleans oil ways ensuring oil flow to critical moving parts.

Forté’s New Generation Engine Flush is used with Forté Oil System Protector as part of the Clean and Protect package

Strong as an Ox Super Glue Gel is a seriously strong adhesive that instantly bonds most non-porous materials, dries colourless and sets within 10 seconds. Use Strong as an Ox Super Glue Gel to bond aluminium, ceramics, fine china, most plastics, rubber, wood, jewellery plus many other household items. With maximum bond strength achieved after just 12 hours, Strong as an Ox Super Glue Gel is the only glue you'll need for household fixes, art and craft projects, and DIY.

Features:

• Strong as an Ox Super Glue Gel - 20g
• A seriously strong adhesive that bonds almost immediately
• Bonds most non-porous surfaces together including aluminium, ceramics, fine china, jewellery, most plastics, pottery, rubber and wood
• Dries colourless
• Sets within 10 seconds
• Maximum bond strength within 12 hours

Directions for Use:

1. Remove nozzle and pierce tube seal with reverse end of cap and replace nozzle
2. Ensure surfaces to be bonded are clean and fit exactly
3. Apply one drop to only one of the surfaces to be bonded
4. Do not spread, align surfaces and apply slight pressure
5. Allow several minutes to set and for maximum bond strength leave it up to 12 hours
6. Wipe tip of tube, replace cap and store upright in a cool, dry place

Caution: Not suitable for use with Polyethylene, Polypropylene, Teflon or Fabrics. Will not permanently bond glass or materials containing alkaline elements. Not recommended for repairing handles or vessels containing hot liquids. Wash hands thoroughly after handling. Keep out of reach of children.

Strong as an Ox Heavy Duty Multi-Purpose Spray Adhesive is one of the most useful and versatile tools for home decorating, craft and stationery projects, construction and household fixes. It's easy to use, quick drying and yields professional results for practically any project you can imagine. It sticks paper, cardboard, foil, fabric, cushion foam, most plastics, metal, wood and much more and dries in minutes.

Features:

• Strong as an Ox Extra Strong Spray Glue Adhesive, 500ml
• Bonds paper, cardboard, foil, fabric, cushion foam, most plastics, metal, wood and much more
• Dries clear
• Extra strong high strength adhesion
• Tacky within 10 seconds - 15 minutes
• Full adhesion within 10 seconds - 30 minutes

Directions for Use:

1. Ensure surfaces to be bonded are clean, dry and free from dirt, dust, grease, paint, polish and loose materials
2. Hold can 15-20cm (6-8 inches) from surfaces to be sprayed. Spray with a light, uniform coat
3. Make bond while adhesive is aggressively tacky (1-3 minutes) and press the two surfaces together firmly
4. Some porous surfaces may require two coats and longer drying time
5. After use, invert can depress spray nozzle until spray is free of adhesive. Clean spray nozzle with turpentine or solvent
6. Two surface joins are complete after 30 minutes, for extra strong bond spray both surfaces and allow a 30 second minimum drying time
7. Store in a cool, dry place

Caution: Do not use on polystyrene, solvent sensitive surfaces or asphalt. Test on an inconspicuous area before use to check spray pattern and ensure suitability. Use only in a well ventilated area.

Epoxy Glue is the world's fastest, toughest mender. It has tremendous strength and durability, and is easy to use - just mix and apply. This Strong as an Ox Epoxy Resin is a multi-purpose, two part epoxy resin and hardener contained in an easy to use syringe. Quick setting and super strong, it can be used on metal, wood, ceramics, glass, fibreglass and most plastics. It hardens in minutes creating a tough, rigid high strength bond. With maximum strength achieved after around 1 hour, Strong as an Ox Two Part Rapid Set Epoxy Resin is perfect for everyday interior and exterior repairs throughout the home and consists of 8g Resin and 8g Hardener.

Features:

Strong as an Ox Two Part Rapid Set Epoxy Resin Adhesive - 2 x 8g
Bonds ceramics, fibreglass, glass, metal, most plastics, wood and much more
Consists of a pair of 8g two part resin and epoxy hardener in an easy to use syringe
Dries clear
Extra strong high strength adhesion
Dries within 6 minutes
Fully cures in approx. 1 hour
Directions for Use:

Roughen, clean and dry all surfaces to be repaired, making sure they are free from dirt and grease
Turn nozzle end up and pull plunger back slightly (3mm). Allow air bubbles to rise to top. Cut nozzles off with scissors being careful to avoid leakage
Remove plastic cap preventing plunger being pushed inwards. Push plunger to dispense equal amounts of hardener and resin onto a disposable surface such as a piece of cardboard. Pull back plunger to stop flow. Place plastic cap onto open nozzle ends to prevent further release of contents
Thoroughly mix resin and hardener with a stirrer for 1 minute then apply to surfaces to be repaired/bonded. Hold firmly in place for 6 minutes to allow product to set. Maximum strength will be achieved after 1 hour
After use, wipe nozzles clean and replace plastic cap immediately. Store in a cool, dry place
Caution: Not recommended for use with flexible materials such as Polypropylene. If in doubt, always test on an inconspicuous area first. Low atmospheric temperatures will lengthen drying time. Not recommended for use above 60°C.

Forté Oil Fortifier has been tested in a wide variety of high mileage engines. This has proven the reliability of the product in restoring performance and greatly extending the life of engines far beyond the stage where they would have required extensive repairs or a complete overhaul. 

Forté Oil Fortifier is recommended for use in engines of older or higher mileage vehicles which are showing signs of wear; evidenced by high oil consumption or excessive exhaust smoking.

Forté Oil Fortifier is compatible with all crankcase fill oils, including fully synthetic, which meet the specification of API and ACEA classifications. 

Forté Oil Fortifier is not recommended for use in engines incorporating wet clutches.

• Reduces oil consumption in engines showing signs of wear
• Minimises exhaust smoking by providing better piston ring sealing
• Restores performance to tired engines
• Improves oil pressure to better protect moving parts