Collection: Truck Lighting Accessories (49)

Made from high-tech impact resistant & washable neoprene, Lazer Lamps LED light bar neoprene covers are available for our Triple-R and Linear range. Secured using high strength Velcro pads, the covers are easy to fit and remove, ensuring your lighting investment remains in perfect condition whenever not in use. The cleverly designed covers also have the benefit of significantly reducing wind noise which can come from some bigger light bars when mounted above the windscreen.

• Made from waterproof and impact resistant, washable neoprene
• Secure fixing with high-strength velcro pads
• Reduces wind noise which can affect some light installations
• Quick & easy to fit and remove
• Available in 7 different sizes for Linear:
• 6 LED – 232mm wide
• 12 LED – 382mm wide
• 18 LED – 532mm wide
• 24 LED – 682mm wide
• 36 LED – 982mm wide
• 42 LED – 1132mm wide
• 48 LED – 1282mm wide

The Front Runner Roof Rack Mounting Kits enable mounting of Lazer Lamps’ high performance LED light bars to the underside of the front of the roof rack system for a simple, secure install. Included within the kit are: M8 slide nuts plus fasteners, and ‘Standard’ Linear Side Mount Brackets (supplied anti-theft brackets with the Linear LED lights themselves are not suitable for this type of install). Also provided is a cable grommet and heat-seal butt connectors for assisting with the electrical connection of your light. Appreciating some roof installations can be subject to a degree of wind noise, included with the Front Runner Mounting Kit is a 1.25m length of foam strip with adhesive backing. The foam strip can be added to the top side of the light bar to reduce wind noise when required.

• Quick and Easy Installation
• Designed for facilitating LED light bar mounting to Front Runner Roof Rack System
• Supplied slide nuts and mounting fixtures optimised for Lazer side mounting brackets
• Stainless steel hardware
• Included foam strip reduces potential wind noise
• Cable grommet and butt connectors enable electrical connections
• Manufactured in the UK

The Rhino-Rack (Series 5) Roof Rack Mounting Kits enable mounting of Lazer Lamps’ high performance LED light bars to the underside of the front of the roof rack system for a simple, secure install. Included within the kit are: M8 flat channel nuts plus fasteners, and ‘Standard’ Linear Side Mount Brackets (supplied anti-theft brackets with the Linear LED lights themselves are not suitable for this type of install). Also provided is a cable grommet and heat-seal butt connectors for assisting with the electrical connection of your light. Appreciating some roof installations can be subject to a degree of wind noise, included with the Rhino-Rack Mounting Kit is a 1.25m length of foam strip with adhesive backing. The foam strip can be added to the top side of the light bar to reduce wind noise when required.

• Quick and Easy Installation
• Designed for facilitating LED light bar mounting to Rhino-Rack (Series 5) Roof Rack System
• Supplied channel nuts and mounting fixtures optimised for Lazer side mounting brackets
• Stainless steel hardware
• Included foam strip reduces potential wind noise
• Cable grommet and butt connectors enable electrical connections
• Manufactured in the UK

Designed for Sentinel LED spotlights, the Angled Transfer Plate is a heavy duty right-angled mounting bracket designed to facilitate installation where the original mounting location isn’t suitable or accessible. This includes facilitating mounting to roof-rack systems, where the bracket fixes to the channel on the underside of your roof-rack system, using supplied slot/square nuts, and with the Sentinel Wide Mount subsequently rotated into a vertical orientation. Supplied in pairs, and made from 5mm mild steel with satin black e-coat, the transfer plate perfectly match the finish of the original Sentinel lamp bracket, while providing maximum corrosion resistance to ensure your install stays looking in mint condition for years.

• Flexibility to adjust mounting plane from a horizontal to vertical position (or vice versa)
• Supplied in pairs
• Produced from 5mm mild steel
• Electro-Coated to automotive 1000hr corrosion specifications
• Finished in stain black to match Sentinel lamp bracket
• Supplied with stainless steel fixtures
• Designed & manufactured in UK

Designed for Sentinel 9” LED spotlights with ‘Slim’ mounting bracket, the Flat Transfer Plate is designed to enable lamps to be forward mounted between 32mm – 57mm. Ideal when looking to mount lights with limited clearance at the rear of the lights. Made from 5mm mild steel with satin black e-coat, the transfer plates perfectly match the finish of the original Sentinel lamp bracket (compatible with ‘Slim’ mount only), while providing maximum corrosion resistance to ensure your install stays looking in mint condition for years. Supplied in pairs.

• Supplied in pairs
• Produced from 5mm mild steel
• Electro-Coated to automotive 1000hr corrosion specifications
• Finished in stain black to match Sentinel lamp bracket
• Supplied with stainless steel fixtures
• Flexibility to move light forwards 32mm – 57mm
• Compatible with Sentinel ‘Slim’ mount brackets only
• Designed & manufactured in UK

When mounting auxiliary driving lights to the rear Sports Bar of a pick-up, or other locations where the lighting performance might benefit from the lamps being in a more elevated position, the 50mm spacer kit is the ideal solution. Designed for use with Lazer Lamps’ 76mm (3”) Tube Clamps, the spacer kits come supplied as pairs, with M8 x 80mm bolts to facilitate fixing.

• 50mm Spacer
• Optimised for use with 76mm Tube Clamps
• Supplied in pairs
• M8 x 80mm hex head bolts included

When the requirement is for a discreet, secure, and robust install without the need to drill any bodywork, look no further than Lazer's new Bumper Beam Mounting Kit. A universal solution, that is expected to suit almost any passenger car, 4x4, or light commercial vehicle, the brackets offer a neat alternative to a Licence Plate Mount, with the benefit of additional protection from theft. Included with the kit are a set of 80mm and 120mm bolts to enable the brackets to clamp around the crash bar / bumper beam on different vehicles, regardless of the size/depth of the bar itself.

• Produced from 5mm mild steel with satin black powder coat finish
• Supplied with 80mm / 120mm stainless steel fixing bolts
• Electro-Coated to automotive 1000hr corrosion specifications.
• Flexibility to move light:
• up/down +/-40mm
• forwards/backwards +/- 10mm
• Universal compatibility in regards vehicle fitment and lights
• Designed & manufactured in UK

To assist with the integration of the Glide 20” curved light bar, we’re delighted to offer a dedicated licence plate mount kit. The kit is only compatible with a light mounted above the licence plate *, and provides for a subtle install with the possibility for the mounting brackets to be barely visible behind and underneath the lamp. The two-part construction (at each end of the lamp) fits into pre-drilled threaded holes on the underside of the lamp, for a secure and robust install. Supplied with A2 stainless steel fasteners for securing the brackets to the lamp, the fixture of the mounting plate to the vehicle is intended to be completed with supplied rivets or thread-forming screws. For additional security a dedicated Ant-Theft Fasteners set is available to purchase separately. * For mounting under the licence plate, please use our generic Licence Plate Mount, with Glide Side Mounts.

• Made from stainless steel with a black, powder coat finish
• Designed for Glide mounting above the Licence Plate
• Includes A2 stainless steel fixings for quick and secure fitting
• Quick fitting time <10mins
• Anti-Theft Fastener Kit also available (sold separately)
• Manufactured in the UK

For a more robust looking mounting system for your Sentinel lamp look no further than the ‘Wide’ Mount Kit. Designed for a more ‘heavy-duty’ look, the bracket is made from diecast aluminium, which undergoes the same in-house, automotive-grade corrosion pre-treatment, and satin black powder coat process as the lamps themselves. An embossed Sentinel logo, on the side of the mounting bracket, enhances the look of the mount yet further.

• Sentinel mounting bracket with a more ‘heavy-duty’ appearance
• Made from diecast aluminium
• Automotive grade corrosion resistance
• Satin black powder coat finish
• Stamped Sentinel logo branding

For a sleek, streamlined mounting kit for your Sentinel lamp look no further than the ‘Slim’ Mount Kit. Designed to precisely match the lines of the lamp itself, the bracket is made from diecast aluminium, which undergoes the same in-house, automotive-grade corrosion pre-treatment, and satin black powder coat process as the lamps themselves. An embossed Sentinel stamp, on the side of the mounting bracket, enhances the look of the mount yet further.

• Shaped mounting bracket to match lamp contours
• Made from diecast aluminium
• Automotive grade corrosion resistance
• Satin black powder coat finish
• Stamped Sentinel logo branding

The Air Side Transfer Plates are expertly finished with a sleek black powder coating, offering both durability and style. Designed to seamlessly pair with the side mounting kit (1118K-B), these plates are as versatile as they are visually appealing. Constructed from high-quality stainless steel and including A2 stainless steel hardware, the transfer plates ensure a reliable, long-lasting solution. The lamp mounting plate fits directly into pre-drilled, threaded holes on the underside of the lamp. For added flexibility, the bracket orientation can be adjusted when utilising the side mount kit (1118K-B, sold separately) to raise or lower the light by up to 13mm, allowing you to achieve the perfect fit for your vehicle.

• Made from stainless steel
• Powder coated black
• A2 stainless steel hardware included
• Compatible with Air lamps only

Pre-treated with an e-coating for maximum corrosion resistance, then powder coated black for a sleek finish, the side bracket kit from Lazer offers versatility and sleek styling, when combined with the Glide 20” curved LED light bars. Made from stainless steel and with accompanying A2 stainless steel hardware included, the side mount kit incorporates a lamp mounting plate which fixes into pre-drilled threaded holes on the underside of the lamp, and accompanying vehicle mounting brackets. The bracket orientation can be altered in order to raise/lower the light <13mm relative to the vehicle mounting point.

• Made from stainless steel
• Pre-treated with an e-coating, then powder coated black
• A2 stainless steel hardware included
• Height adjustable allowing for lamps to be raised/lowered <13mm
• Compatible with Glide lamps only

Pre-treated with an e-coating for maximum corrosion resistance, then powder coated black for a sleek finish, the side bracket kit from Lazer offers versatility and sleek styling, when combined with the Linear high performance LED spotlights. A2 stainless steel hardware included. Bracket orientation can be altered in order to raise/lower the light <13mm relative to the vehicle mounting point. For use with Linear products only.

• Made from mild steel
• Pre-treated with an e-coating, then powder coated black
• A2 stainless steel hardware included
• Height adjustable allowing for lamps to be raised/lowered <13mm
• Compatible with Linear lamps only

Utilising 3mm folded aluminium, which is given a corrosion resistant pre-treatment, then black powder coated, the latest side brackets from Lazer offer a lightweight versatile solution for mounting any Lazer High Performance light. The bracket kit completes the sleek styling of the products and vehicle integration. Brackets are supplied in pairs with A2 stainless steel M6 hardware included, for both Hybrid Optic and Triple-R/Carbon Series lamps.

• 3mm folded aluminium side brackets
• Corrosion resistant pre-treatment with black powder coat finish
• A2 stainless steel hardware included
• Fully adjustable allowing for lamps to be raised/lowered <3cm
• Compatible with all Lazer High Performance lights - separate fixtures for Hybrid Optic and Triple-R/Carbon Series lamps

Pre-treated with an e-coating for maximum corrosion resistance, then powder coated black for a sleek finish, the side bracket kit from Lazer offers complete versatility and mounting flexibility, combined with sleek styling. A2 stainless steel hardware included. Bracket orientation can be altered in order to raise/lower the light <3cm relative to the vehicle mounting point. Recommended for use with all Triple-R and ST/T range lamps.

• Made from mild steel
• Pre-treated with an e-coating, then powder coated black
• A2 stainless steel hardware included
• Fully adjustable allowing for lamps to be raised/lowered <3cm

Our innovative "Centre Mount" system for the Air LED Lamps is designed to offer a sleek, low-profile installation. This system allows the lightbar to sit closer to the mounting point, giving your setup a clean and modern look. The Centre Mount kit includes durable A2 stainless steel hardware, a black powder-coated stainless steel bracket, and tough PA66 GF30 (glass-filled nylon) mounts. The mounts are versatile and can be installed at various point below the lights, thanks to the pre-drilled holes in the lamp mounting channels and the included hardware. You can also adjust the bracket orientation to move the lightbar further forward or backward, ensuring a perfect fit for your vehicle.

• Made from stainless steel
• Bracket powder coated black
• A2 stainless steel hardware included
• Uses PA66 GF30 (glass filled nylon) material
• Includes one mount only (2x required for Air Lamps)
• Fully adjustable - reversible bracket orientation
• Compatible with Air lamps only