24 volt
33 Ohm
Maximum Current 350ma
Supports Bulb Failure
1 x Smart Load required for each side of the Vehicle
Dimensions L.80mm H.45mm D.17mm
Pack Size 1
12 - 24 volt
LEDs - Stop x 15, Tail x 32, DI x 12, Fog x 4, Rev x 4, No plate x 4
Functions - Stop/Tail/DI/Fog/Rev/No. Plate/Reflex Reflector
2 Bolt Surface Mount Fixing
Cable Connection
Current draw at 12v is 1.5 Amps
Left Hand Fitting
EMC, ECE, CE and E Mark Approved
Rated IP67
Incremental Indicator
Neon Effect
Reverse polarity protected
Dimensions L.235mm H.110mm D.32mm
Pack size 1
12 - 24 volt
Stop x 12 LEDs, Tail x 16 LEDs, DI x 8 LEDs
Functions - Stop | Tail | DI
2 Bolt Surface Mount Fixing
Current Draw at 12 volt is 0.50 Amps
Universal Fitting
Rated IP67
ECE R10, EMC R10, CE, E Approved
Incremental Indicator
Neon Effect
Terminal Connection
Ultrasonic Welded Seal
ABS Bezel with Polycarbonate Housing and Lens
Reverse Polarity Protection
3 coloured Bezels supplied with each Lamp
Dimensions Dia. 140mm D.85mm
Pack Size 1
Functions - Stop | Tail| DI | Number Plate | Fog | Rev | Side Marker
2 Bolt Surface Mount Fixing
Schlemmer Plug
For: M.A.N | Iveco | Scania
Left Hand Combination Lamp
E Approved
Plastic Body
Dimensions L.470mm H.130mm D.85mm
Pack Size 1
10 - 30 volt
2 x LEDs
2 Bolt Surface Mount Fixing
Cable Connection
Current Draw at 12 volt is 0.30 Amps
E Approved
Plastic Body
ECCO No. L867.00.LDV
Dimensions L.100mm H.55mm D.48mm
Pack Size 1
10 - 32 volt
5 x 2.5 watt CREE LEDs
1420 Lumens
2 Point Surface Mount Fixing
Current Draw at 12 volt is 1.25 Amps
Rated IP67
E Mark Approved
Solid Aluminium Base
Dimensions L.230mm W.63mm D.50mm
Pack Size 1
10 - 30 volt 15 x 3 watt EPISTAR LEDs Single bolt fixing Current draw at 12 volt is 1.6 amps Rated IP67 ECE R10 and E approved Vertical or horizontal mounting Flood beam pattern Lumens 6300 raw / 4500 effective High purity diecast aluminium housing with Polycarbonate lens Dimensions(Vertical position) H.177mm W.93mm D.45mm (Horizontal position) H.118mm W.150mm D.45mm Pack Size 1
10 - 30 volt
16 x 3 watt SMD LEDs
Lumens 4800 Raw / 4300 Effective
Single Bolt Surface Mount Fixing
Current Draw at 12 volt is 3 Amps
Rated IP67
EMC, CE and E Approved
Reverse Polarity Protection
Polycarbonate Flood Beam Lens and Aluminium Body
Dimensions H.137mm W.110mm D.70mm
Pack Size 1
10 - 30 volt
16 x OSRAM LEDs
Lumens 5200 raw / 4000 effective
Single bolt surface mount fixing
Current draw at 12 volt is 2.6 amps
Rated IP69K
ECE R10, EMC, CE and E approved
Flood beam pattern
Reverse polarity protection
Aluminium housing with polycarbonate lens
Dimensions H.110mm W.100mm D.45mm
Pack size 1
10 - 30 volt
16 x OSRAM LEDs
Lumens 5200 raw / 4000 effective
Single bolt surface mount fixing
Current draw at 12 volt is 2.6 amps
Rated IP69K
ECE R10, EMC, CE and E approved
Switched
Flood beam pattern
Reverse polarity protection
Aluminium housing with polycarbonate lens
Dimensions H.110mm W.100mm D.45mm
Pack size 1
Typical Black Magic appearance including black brackets in a robust design
Powerful light output due to modern reflector system in all 14 ECE-approved versions!
Typical mounting locations include installation on the roof or roof bar, the radiator grille or bumper
7˝ Double Row Mini Lightbar, eTSD, ECE ref. 30
IP 68, IP 69K, ECE-R10, ECE-R149, 2,000 mm cable with open ends, 5,700 Kelvin
Part Number: 1FJ 358 196-451
The ECE type-approved HELLA Black Magic Lightbars provide high beam (ECE-R149) with a very powerful light output of up to 9,200 effective lumens, ideal for off-road situations where you need it most and for trucks that need really good light. Both the slim and double lightbars offer a high recognition effect with their stylish and robust look in an all-black design. Typical installation locations are on the roof or roof bar, the radiator grille or bumper. The product complies with the highest dust / waterproof class. The extra-long 2 m cable makes it easy to attach to your vehicle.
Typical Black Magic appearance including black brackets in a robust design
Powerful light output due to modern reflector system in all 14 ECE-approved versions!
Typical installation locations: Roof or roof bar, radiator grille or bumper. Recommended accessories: Holder set for rear mounting 8HG 358 176-371 (version "Slim")
40˝ Slim Curved Lightbar, eTCS, ECE ref. 50
IP 68, IP 69K, ECE-R10, ECE-R149, 2,000 mm cable with open ends, 5,700 Kelvin
Part Number: 1FJ 358 196-521
The ECE type-approved HELLA Black Magic Lightbars provide high beam (ECE-R149) with a very powerful light output of up to 9,200 effective lumens, ideal for off-road situations where you need it most and for trucks that need really good light. Both the slim and double lightbars offer a high recognition effect with their stylish and robust look in an all-black design. Typical installation locations are on the roof or roof bar, the radiator grille or bumper. The product complies with the highest dust / waterproof class. The extra-long 2 m cable makes it easy to attach to your vehicle.
The "Double Row" bracket set for rear mounting is recommended as a mounting accessory for additional support of 40" LED Lightbars. The set includes 2 brackets and 2 sets of screws. The holders are inserted into the guide rail of the headlamp and securely fastened in the desired position with the screws.
Sleek design eliminates dust and dirt from being lodged in edges
Each kit includes the wiring harness with DT connector, switch, connector and relays (easy to install)
Compact design for universal installation
Part Number: 1FA 358 176-821
HELLA‘s Black Magic Cubes are available in 2 sizes, 2.7˝ and 3.2˝. Distinguished by the full blackout appearance and sleek design makes this light stand out from the crowd. Black Magic Cubes received the highest dust and waterproof rating. They come in kits of 2 lights including a wiring harness with DT connector, switch, connector and relays making them easy to install. The 3.2˝ is available in Flood or Spot light and can be upright or pendant mounted or integrated into the body work or bumper. HELLA‘s Black Magic Cubes are ready to brighten up your next adventure.
