LEDSON Pollux9+ Generation 3: More powerful and smarter than ever
With the Pollux9+ Generation 3, you enhance your driving experience with the latest technology from Ledson in an auxiliary light filled with features. With an impressive 120W power output and the groundbreaking feature of pulse-controlled Powerboost, this third generation of Pollux9+ offers increased flexibility and improved brightness when needed most.
Pollux9+ Generation 3 provides outstanding brightness and range to ensure superior visibility and safety in all driving conditions. With its robust design, the Pollux9+ Generation 3 is engineered to withstand tough conditions and is ready to deliver superior performance for years to come.
Pulse-controlled Powerboost - It doesn't get smoother than this.
The Pollux9+ Gen3 comes equipped with Powerboost – an extra power mode for those moments when you need maximum illumination. You can conveniently switch between standard and power boost mode from the driver's seat in your vehicle. With the new generation of Powerboost from Ledson, switching modes is easy with the light switch through a few simple steps.
Switch to Powerboost mode with "10+10+5"
This is done most easily with the 'light switch' when the light switch is in off or parking light mode.
Turn on the auxiliary light for about 10 seconds (between 7-13 seconds)
Flash the auxiliary light rapidly 10 times (within 10 seconds)
On the eleventh flash, hold the light on and after about 5 seconds the Powerboost function will automatically switch on or off.
TIR reflectors
TIR stands for Total Internal Reflection and means that all light is effectively reflected and directed before it is emitted from the reflector. Spill light (the light that is not directed but disappears "unfocused" from the lighting without actually serving any purpose) is minimized. A traditional reflector directs and focuses most of the light but far from all; Pollux 9+ has these TIR reflectors for maximum light.
Features:
E-marked, ECE R112 / R10 / R7 (white position light)
Equipped with pulse-controlled Powerboost
EMC secured (does not interfere with radio signals)
With position light (4 pcs LED) yellow-orange or xenon white (connect the colour you prefer)
"Driving beam" light pattern (33491236) or "Spot Beam" light pattern (33491237)
Driving Beam Range: 407 m (1 lux), Powerboost: 659 m (1 lux)
4200 lumens (theoretical), 3500 lumens (actual)
Powerboost 13000 lumens (theoretical), 10500 lumens (actual)
Colour temperature 5000K (Neutral White)
TIR optical system (Total Inner Reflection)
Pressure equalization membrane
36-month warranty
Technical Data:
120W (12 x 10W LED)
Nominal power 92.4 W
IP68 & IP69K (water/dustproof)
DT connector (4-pin) included
Electronic heat management
Voltage 9-36 V Load 3.2 A @ 12 V and 1.6 A @ 24 V Load
Powerboost 9.8 A @ 12 V and 4.6 A @ 24 V
Dimensions & Weight:
Width: 218 mm
Height: 234.5 mm (including bracket)
Depth: 68.5 mm
Weight: 1.9 kg
Cable length: 650 mm
Included:
Ledson Pollux9+ Generation 3 LED extra light
Bolts and screws to attach the extra light with either one or two mounting points
DT connector (4-pin)
Installation instructions
Cable Installation Instructions (detailed installation instructions are included with the product):
Red: Extra light (+)
Black: Extra light / Position lights (- ground)
White: Position lights (+) white light
Yellow: Position lights (+) yellow-orange light
NOTE: The DT connector must not be cut, as it increases the risk of moisture damage and voids the warranty.
