Collection: Forte (13)

Forté Diesel Emission Reducer has been specifically formulated to rapidly reduce exhaust emissions and help vehicles pass the new emissions test.

Forté Diesel Emission Reducer contains a special fuel-borne catalyst to improve combustion and clean the fuel system, combustion chamber and exhaust system.

Forté Diesel Emission Reducer should be added to the fuel system.

• Ultra-fast exhaust emission and soot reduction

• Reduces exhaust smoke

• Removes internal and external injector deposits restoring flow and spray patterns

• Cleans the combustion  chamber improving compression

• Cleans after combustion and through the external exhaust system and its components

• Restores combustion and engine performance

• Compatible with all diesel engines including diesel hybrid

• For all diesel fuels up to B30

Works before, during, and after combustion without increasing the exhaust gas value

High exhaust emissions can have other causes. For best results, it is recommended to flush the engine with New Generation Engine Flush and change the oil, oil filter, and air filter.

Forté Diesel Particulate Filter Cleaner and Regenerator has been specifically formulated to combat the adverse effects that start/stop driving conditions have on Diesel Particulate Filter (DPF) regeneration. With continued stop/start driving patterns and road restriction challenges such as Regular travel in low-speed zones, soot loading builds up in the DPF since the ECU is unable to make the necessary small adjustments to the fuel injection timing to increase the exhaust temperature and initiate regeneration.

Forté DPF Cleaner and Regenerator uses a catalyst to adhere to the soot particles during combustion, lowering the temperature at which they can be burnt off. The soot particles will burn at lower temperatures in the soot filter area, helping to regenerate the filter, especially in cases where exhaust temperatures are low, like stop-and-go traffic, city traffic, and short drives.

Forté DPF Cleaner and Regenerator should be used at regular service intervals in conjunction with Forté Advanced Formula Diesel Treatment and when the symptoms indicate that treatment is necessary.

Recommendation:

Clean and lubricate the fuel system with Forté Advanced Formula Diesel Treatment during regular maintenance and add Forté DPF Cleaner and Regenerator to ensure efficient Diesel Particulate Filter operation.

Compatible with all diesel engines.

• Aids passive regeneration of Diesel Particulate Filter
• Actively reduces soot emissions
• Improves stability of Diesel Particulate Filter systems
• Compatible with all diesel engines
• For diesel and bio diesel up to B30

Forté Oil Fortifier has been tested in a wide variety of high mileage engines. This has proven the reliability of the product in restoring performance and greatly extending the life of engines far beyond the stage where they would have required extensive repairs or a complete overhaul. 

Forté Oil Fortifier is recommended for use in engines of older or higher mileage vehicles which are showing signs of wear; evidenced by high oil consumption or excessive exhaust smoking.

Forté Oil Fortifier is compatible with all crankcase fill oils, including fully synthetic, which meet the specification of API and ACEA classifications. 

Forté Oil Fortifier is not recommended for use in engines incorporating wet clutches.

• Reduces oil consumption in engines showing signs of wear
• Minimises exhaust smoking by providing better piston ring sealing
• Restores performance to tired engines
• Improves oil pressure to better protect moving parts

Forté Seal Conditioner is a synthetic seal treatment that restores the elastomer properties to seals.

A major cause of oil burning and exhaust smoking in automotive engines is due to the valve stem seals hardening and shrinking, which results in oil leaking past these seals into the combustion chambers. This condition can be treated by adding Forté Seal Conditioner to the crankcase oil.

Forté Seal Conditioner is compatible with all conventional crankcase and gear oils, including fully synthetic and semi-synthetic engine and gear oils. Forté Seal Conditioner is not compatible with aqueous and non-petroleum oil-based fluids.

• Reduces oil burning and exhaust smoking in vehicles where oil is leaking past the valve stem seals
• Reduces unsightly leaks from camshaft and crankshaft oil seals
• Reduces oil leaking from seals in a wide variety of automotive equipment
• Ideal for used car preparation

Forté New Generation Engine Flush is an improved blend of cleaning agents, dispersants and anti-wear agents with increased cleaning and moisture emulsification capabilities.

It is formulated to overcome the increased levels of contamination in modern high output tight tolerance engines caused by the effects of biodiesel and ethanol based fuels and exhaust gas after-systems.

Combat Biodiesel and Ethanol Fuel Contamination in the Oil System

Specifically for:

Diesel Turbo

DPF

SCR

Start/Stop

Wet Belt

• Rapid cleaning of engines internally and provides anti-wear protection.
• Cleans and removes sludge, varnish, and lacquer caused by the effects of biodiesel and ethanol-based fuels.
• Emulsifies moisture present in the crankcase and removes white sludge deposits.
• Compatible with internal drive belt systems.
• Stabilises cylinder compression restoring lost engine power.
• Cleans oil ways ensuring oil flow to critical moving parts.

Forté’s New Generation Engine Flush is used with Forté Oil System Protector as part of the Clean and Protect package

Forté Diesel Specialist Injector Cleaner is formulated specifically to remove Internal Diesel Injector Deposits (IDID) and ensure injector cleanliness, restore spray pattern, and restore combustion efficiency.

• Provides rapid cleaning of the fuel injector

• Removes the internal diesel injector deposits (IDID) also called ‘Injector Sticking’ and deposits on the injector nozzles

• Restores lost power and acceleration by removing harmful deposits that build up over time

• Improves fuel economy and overall engine performance due to fuel system clean-up

• Lowers exhaust gas emissions

• Easier cold starting and better ignition quality

• Harmless to Catalytic Converters and particulate filters

• Compatible with all Diesel Fuels including biodiesel up to B30

Can also be used for regular maintenance in conjunction with Forté Advanced Formula Diesel Treatment

Forté Bio Degreaser & Cooling System Flush is a blend of inorganic acids and inhibitors and a heavy-duty cleaner/degreaser free of petroleum or chlorinated solvents. It effectively removes oil, sludge, scale and rust deposits from the internal surfaces of automotive cooling systems and restores heat transfer efficiency to allow the engine to run at its designed operating temperature; thus reducing heat-related problems and engine failure.

• Removes oil, sludge, scale, and rust deposits
• Restores heat transfer efficiency and prevents heat-related engine failures
• Compatible with all cooling system components, cooling fluids, and antifreeze including ethylene glycol and O.A.T.

Forté Advanced Formula Diesel Treatment has been specifically formulated to combat driveability concerns caused by the by-products of combustion and the adverse effects of fuel degradation caused by challenges such as regular travel in low speed zones.

Forté Advanced Formula Diesel Treatment cleans and lubricates the whole of the fuel system both pre and post-combustion. It improves overall engine power and efficiency, as well as considerably reducing costly down time and component replacement in direct and indirect injection engines. 

Forté Advanced Formula Diesel Treatment is compatible with common rail direct injection and Pumpe Duse diesel engines.

Forté Advanced Formula Diesel Treatment does not affect the cetane rating of diesel fuel.

• Reduces black smoke emissions
• Restores injector spray patterns
• Improves engine performance and response
• Maintains EGR valve and variable vane turbo cleanliness
• Lubricates and extend the life of injectors and fuel pump

OIL SYSTEM PROTECTOR

Forté Oil System Protector has been specifically formulated to prevent the effects of contamination build-up and crankcase acids within the engine oil system. Extended oil drain periods and stop/start driving conditions place greater demand on engine oils to provide suitable protection on technically sophisticated engines, compromising the engine oil’s ability to protect and leading to excessive wear and reduced engine efficiency.

Forté Oil System Protector is designed to optimise the performance of engine oils to combat contamination, improving and maintaining crankcase cleanliness and reducing wear.

Forté Oil System Protector is compatible with all crankcase fill oils for petrol and diesel engines, including fully synthetic, which meet the specification of API and ACEA classifications.

Forté Oil System Protector is added to optimise the performance of new oil. It is essential that engines are flushed with Forté Advanced Formula Motor Flush at each service.

• Optimises engine oil performance
• Maintains oil stability during extended service intervals
• Prevents oil burning
• Maintains cleanliness of valve train systems such as Variable Valve Timing and Hydraulic Valve Lifters to prevent sticking or noise

Forté Oil System Protector is only sold with New Generation Engine Flush as part of the Clean and Protect package

NEW GENERATION ENGINE FLUSH

Forté New Generation Engine Flush is an improved blend of cleaning agents, dispersants and anti-wear agents with increased cleaning and moisture emulsification capabilities.

It is formulated to overcome the increased levels of contamination in modern high output tight tolerance engines caused by the effects of biodiesel and ethanol based fuels and exhaust gas after-systems.

Combat Biodiesel and Ethanol Fuel Contamination in the Oil System

Specifically for:
Diesel Turbo
DPF
SCR
Start/Stop

Wet Belt

• Rapid cleaning of engines internally and provides anti-wear protection.
• Cleans and removes sludge, varnish, and lacquer caused by the effects of biodiesel and ethanol-based fuels.
• Emulsifies moisture present in the crankcase and removes white sludge deposits.
• Compatible with internal drive belt systems.
• Stabilises cylinder compression restoring lost engine power.
• Cleans oil ways ensuring oil flow to critical moving parts.

Forté’s New Generation Engine Flush is used with Forté Oil System Protector as part of the Clean and Protect package

Forté Top End Treatment is designed to combat contamination, improve and maintain the oil system and valve train cleanliness. Technical developments in engine design have made significant improvements in increasing engine power output and lowering emissions. Extended service intervals, however, can contribute to excessive contamination build-up compromising valve train operation.

Forté Top End Treatment is compatible with all crankcase fill oils, including fully synthetic, which meet the specifications of API and ACEA classifications. It is compatible with High-Pressure Direct Injection petrol and diesel engines.

Forté Top End Treatment maintains the efficient operation of VVT and HVT systems.

We recommend using it in conjunction with Forté New Generation Engine Flush.

• Prevent and eliminate noisy Hydraulic Valve Lifter (HVL) operation

• Free off and prevent sticking Variable Valve Timing (VVT) Systems

• Free off sticking oil pressure control systems 

Forté Radiator Stop Leak & Cooling System Conditioner is a unique blend of natural fibers and surface active agents that combine to plug hairline cracks and pinholes in the radiators and cooling systems of motor vehicles.

When used as directed, Forté Radiator Stop Leak & Cooling System Conditioner will not cause any blockage of the radiator cores or heater matrix; nor will it harm any cooling system components.

Forté Radiator Stop Leak & Cooling System Conditioner is compatible with all Mono Ethylene Glycol-based and OAT coolants. 

It is recommended that Forté Radiator Stop Leak & Cooling System Conditioner is carried in recovery vehicles as an essential emergency repair item.

• Effects emergency cooling system repairs to prevent loss of coolant
• Keeps vehicles on the road until the replacement components become available
• Enables extended trips to be completed without costly repairs or wasted time in the event of a cooling system leak
• Removes oxygen from the cooling system to prevent limescale and corrosion build-up
• Allows commercial vehicles to complete round trips and get back to their base to carry out repairs in the event of cooling system leakage whilst on a trip

Forté Diesel Turbo Cleaner is specifically formulated for vehicles fitted with Variable Geometry Turbos. Particles from incomplete combustion adhere to the variable vanes causing them to stick, reducing vehicle power and efficiency, resulting in an engine management fault. 

Recommendation:

Forté Diesel Turbo Cleaner should be used at regular service intervals in conjunction with Forté Advanced Formula Diesel Treatment and when the symptoms indicate that treatment is necessary.

• Cleans sticking Variable Geometry Turbos without dismantling
• Actively reduces soot emissions
• Cleans EGR Valves
• Compatible with all diesel engines
• For diesel and bio diesel up to B30

Forté Advanced Formula Motor Flush has been specifically formulated to combat the effects that extended oil drain periods and modern driving habits have on today’s technically sophisticated engines. Urban cycle, regular travel in low-speed zones and start/stop driving patterns increase the rate at which acid builds up; leading to accelerated and premature engine wear. Excessive lacquer and varnish formation reduces the efficiency of oil system components, such as VVT systems, piston rings, and Hydraulic Valve Lifters.

Forté Advanced Formula Motor Flush is fully compatible with all engine components and engine oils which are formulated to meet API and ACEA Service Classifications and international motor manufacturers’ specifications.

It is essential that engines are flushed with Forté Advanced Formula Motor Flush at each service.

Forté Advanced Formula Motor Flush is fully compatible with and will not affect wet clutches.

• Cleans engines internally and provide anti-wear protection
• Frees sticking piston rings, hydraulic valve lifters and variable valve timing systems
• Removes lacquer, varnish and sludge deposits from the crankcase
• Neutralises crankcase acids, keeping new oil cleaner, for longer