Iveco truck fuel filters for Stralis, Eurocargo and Trakker
Fuel filtration on Iveco trucks protects the high-pressure injection system from contamination that would cause injector wear and premature failure. Modern Iveco engines use common rail injection systems operating at pressures that require very high levels of fuel cleanliness. The primary fuel filter removes particulate contamination, while the water separator stage removes emulsified water that would otherwise cause corrosion and injector damage.
Fleetguard and Donaldson supply OE-quality fuel filter elements for Iveco Stralis, Eurocargo, Trakker and Daily applications. Donaldson P550904 is one of the commonly referenced fuel filter elements for Iveco applications. Service intervals for fuel filters on Iveco trucks are typically 60,000-80,000 km or annually, but vary depending on fuel quality and operating conditions. Drain the water separator bowl at regular intervals between filter changes to remove accumulated water before it passes into the filter element.
Call our team with your Iveco model and engine code to confirm the correct fuel filter reference. UK nationwide delivery or same-day collection from our branches.
Frequently asked questions
How often do Iveco truck fuel filters need replacing?
Fuel filter service intervals on Iveco trucks are typically 60,000-80,000 km or annually, whichever comes first. Poor quality fuel, contaminated fuel or operating in environments where water contamination is more likely may require more frequent replacement. Always follow the Iveco service schedule for your specific model.
What happens if an Iveco fuel filter is blocked?
A blocked fuel filter restricts fuel flow to the injection system, causing loss of power, rough running and difficulty starting. In severe cases the engine may not start at all. Modern Iveco ECUs will often trigger a fault code when fuel pressure drops below the expected threshold, which can be read using diagnostic equipment.
How do I drain the water from an Iveco fuel filter?
The water separator bowl on Iveco trucks has a drain valve or plug at the base. Loosen the drain plug with the engine off and allow the accumulated water to drain into a suitable container. Re-tighten the drain plug before restarting. On vehicles with a dash warning light for water in fuel, the light should extinguish once the water is drained.
