Trailer Lighting (0)

Truckstop Group stocks trailer lighting from Aspoeck for HGV semi-trailers and commercial trailers. The range includes Aspoeck Multiled III and Europoint III rear combination lamps, Promulti and Superpoint III LED marker lights, and Multipoint LED replacement lenses — covering rear, side, and outline marker requirements for trailers on UK and European roads. Next-day UK mainland delivery available.

No products found
Use fewer filters or remove all

Trailer lighting from Aspock: LED rear and marker lamps

Aspock is one of the leading European manufacturers of trailer lighting, with OEM supply relationships with the major trailer builders. Their rear combination lamps — combining stop, tail, indicator, and reverse functions in a single unit — are the standard fitment on a large proportion of the European refrigerated and curtainsider trailer fleet.

The Aspock Multiled III and Europoint III are the primary rear combination lamp options at Truckstop Group. Both use LED technology throughout, eliminating bulb replacement from the maintenance schedule. The Europoint III is the more compact unit designed for trailers where mounting space at the rear corner is limited. The Multiled III is the larger format unit providing higher light output.

The Aspock Promulti is a combined side marker and indicator lamp for the trailer body side. Superpoint III LED markers replace the bulb-type Ecopoint markers on trailers where LED conversion is being carried out during a service or repair. The Multipoint LED replacement lens allows the LED array to be replaced without changing the full lamp housing.

The ASS2 connector is the Aspock-standard electrical connection used on their rear lamps. On trailers with ASS2 sockets already installed, the replacement lamp plugs directly in. SMCG variants use a different connector — check the existing socket type before ordering.

For fitment confirmation, call us on 01527 68279 or contact our team at https://truckstopgroup.co.uk/pages/contact.

Frequently asked questions

What is the ASS2 connector on an Aspock trailer lamp?

The ASS2 is the Aspock-standard multi-pin electrical connector used on their rear combination lamps. It carries all lamp functions through a single connector. Trailers fitted with ASS2 sockets accept direct plug-in replacement with a compatible Aspock lamp. The SMCG variant uses a different connector configuration.

What is the difference between the Aspock Multiled III and Europoint III?

The Multiled III is the larger-format rear combination lamp providing higher light output. The Europoint III is a more compact design for trailers where rear corner mounting space is restricted. Both are full LED units covering stop, tail, indicator, and reverse functions.

Can LED trailer markers replace bulb-type markers directly?

Aspock Superpoint III LED markers are designed as direct replacements for the Ecopoint bulb-type markers. The LED unit fits the same mounting hole and uses the same connector, requiring no modification to the trailer bodywork or wiring.

What causes premature failure of LED trailer lamps?

Water ingress through a damaged seal or a cracked lens is the most common cause. Vibration from poor mounting — particularly where the lamp bracket is bent or the mounting surface is uneven — stresses the internal electronics. Overvoltage from a faulty trailer wiring circuit can also cause LED driver failure.

Do you sell trailer lighting near me?

Truckstop Group delivers trailer lighting to all UK mainland addresses. Next-day delivery is available on stocked lines. Same-day collection is available from our branches in Redditch, Worcester, Birmingham, and Evesham.